BOD OxiDirect Large Brilliant Graphic Display 110 – 240 V

Update Terakhir
05 Mei 2022
Negara Asal
Pembelian Min
1 unit

Spesifikasi BOD OxiDirect Large Brilliant Graphic Display 110 – 240 V

BOD OxiDirect 

BOD Test Set   

  Accurate, automatic and direct control of your wastewater samples


User friendly

    Large brilliant graphic display

    Graphical representation of measured values

    USB & SD Card interface

    Mercury-free, environmentally-friendly

    Remote control

    User-selectable time span from 1 to 28 days

    Free individual programming of each of the six samples

    Inductive stirring system, 110 – 240 V / 50 – 60 Hz




    Waste Water

    Determination of Biological Activity

    Waste Water Treatment Plants

    Analytical Laboratories

    Science & Research


BOD BottleRespirometric methods provide direct measurements of the oxygen consumed by microorganisms from an air or oxygen-enriched environment in a closed vessel under conditions of constant temperature and agitation. Carbon dioxide produced metabolically by the bacteria is chemically bound by the potassium hydroxide solution contained in the seal cup in the bottle.

The result is a pressure drop in the system, which is directly proportional to the BOD value and is measured by the BOD sensor.

The BOD level is then displayed directly in mg/l. The BOD values are stored automatically in the sensor memory in regulary intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/SD card or transfered via USB cable to evaluate the datas on a computer.

The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days – and manometric determination of OECD, for example, generally takes place over a period of 28 days.

Measuring ranges and sample volumes

The BOD level of a sample depends on the quantity of organic matter present, which can vary considerably. The Lovibond® BOD measuring system BD 600 is therefore calibrated for the various sample volumes and the corresponding measuring ranges listed in the table below. The overall measuring range of the system is 0 – 4000 mg/l. For all measuring ranges, BOD is shown directly in mg/l.

Evaluation of measurements

The BD 600 measuring system records a measurement once every hour, independent of the length of the measuring period. This way the quality of the series of measurement can be evaluated in an early stage. Current values and stored values may be called up at any time. Stored value can be displayed numerically or graphically. The table/ graph below illustrates an example of BOD5 evaluation. The development of BOD over a period of five days is easily seen.

The complete BD 600 measuring system

In addition to the BOD unit for measurement and storage of BOD levels, the Lovibond® BD 600 BOD measuring system includes sample bottles, measuring sensors, non-wearing inductive stirring system, overflow measuring flasks for metering of sample volumes, nitrification inhibitor and potassium hydroxide as an absorbent.

Inductive stirring system

The microprocessor-controlled Lovibond inductive stirring system is non-wearing and maintenance-free. In other words, there are no moving parts in the system.

BOD Stirring System

At regular intervals, the magnetic stirring rods are accelerated and slowed down again, taking them up to maximum speed and back down again. This ensures the centralization of the stirring rods. Stirring rods that move away from the centre of the bottle are re-centered quickly and reliably.

The inductive actuation system guarantees maintenance-free operation (no need to replace drive belts or burnt-out drive motors) for many years.

Delivery Content: OxiDirect, complete unit with 6 sensor heads and control unit with batteries, Inductive stirring unit with power supply, 6 sample bottles, 6 rubber gaskets, 6 magnetic stirring rods, 1 overflow flask, 157 ml, 1 overflow flask, 428 ml, 1 bottle, 50 ml potassium hydroxide solution, 1 bottle, 50 ml nitrification inhibitor solution, 1 instruction.

Tintometer GmbH, Lovibond Water Testing, Schleefstr. 8 - 12, DE-44287 Dortmund, Tel.: (+49) 231 / 9 45 10 - 0,

Selain alat tersebut kami juga menjual peralatan laboratorium lainnya seperti

Dehumidifier, Lemari asam, Laminar Air Flow, Autoclave, Furnace, Incubator Hot Plate, Oven dll.

Untuk pelayanan terbaik hubungi:


Ibu Waty

Mobile: 08137685 1098



KOMPLEK RUKO TRITURA VISTA  BLOK A,  JL.  M. BASIR NO. A – 6 Pangkalan  Masyhur, MEDAN 20143

TELP: 081376851098, 061-42779826, 42779836  Fax: 061-42779826

Website :karuniamakmur.indonetwork.co.id


Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Minta Penawaran
Produk Siap di Pesan
Rp 0